dust collector for dry powder mortar drying furnace

The dust collector of the dry powder mortar drying furnace is mainly used to dry granular materials within a certain humidity and particle size range, such as dry powder mortar, yellow sand, molding sand, slag, coal slag, small particle clay, and other small particle materials that are not afraid of high temperature and smoke pollution. The moisture content of the materials dried by the Wantai dry powder mortar drying machine can reach below 1-0.5%. Dry powder mortar drying is one of the important processes in the production of dry powder mortar, and the dust collector of the dry powder mortar drying furnace is a key equipment in the yellow sand drying process

main features 

1. The investment required for equipment is 1/6 of that of imported foreign products

2. The final moisture content of the material is ensured to be below 0.5%, making it the preferred product for dry mixed mortar and slag powder production lines

3. The self insulation thermal efficiency of the cylinder body is over 70% (the thermal efficiency of traditional single cylinder dryers is only 35%), improving the thermal efficiency by 35%

4. The fuel can adapt to coal, oil, and gas. It can dry block materials, granular materials, and powdery materials below 20mm

5. Reduce land occupation by about 50% compared to a single drum dryer, lower civil engineering investment by about 50%, and reduce electricity consumption by 60%

6. The final moisture content can be easily adjusted according to user requirements

7. Low exhaust temperature