powder recovery filter cartridge dust collector

The resistance of the powder recovery filter cartridge dust collector increases with the increase of the thickness of the dust layer on the surface of the filter material. When the resistance reaches a certain specified value, carry out dust cleaning. In order to ensure the normal operation of the system, the upper limit of the resistance of the powder recovery filter cartridge dust collector should be maintained within the range of 1400-1600Pa. When this limit is exceeded, the PLC pulse automatic controller should issue commands through fixed resistance or timing to perform three state dust cleaning. The dust collected in the rear ash hopper is continuously discharged through the ash discharge valve.

Characteristics of powder recycling filter cartridge dust collector:

1. The powder recycling filter cartridge dust collector adopts a vertical filter cartridge structure, which is convenient for dust adsorption and cleaning; Moreover, due to the minimal shaking of the filter material during dust cleaning, the lifespan of the filter cartridge is significantly longer than that of the filter bag, resulting in lower maintenance costs.

2. Adopting the current international offline three state (filtering, cleaning, and static) cleaning method, the "re adsorption" phenomenon during cleaning is avoided, making cleaning completely reliable.

3. The design includes a pre dust collection mechanism, which not only overcomes the disadvantage of direct dust flushing and easy wear of the filter cartridge, but also greatly increases the dust concentration at the inlet of the dust collector.

4. High quality wear-resistant components are used for key components that affect the main performance (such as pulse valves), and the service life of their vulnerable parts, such as membranes, exceeds 1 million times.

5. By adopting the technique of separately spraying and cleaning dust, one pulse valve can simultaneously spray one column (with a maximum of 12 filter cartridges per column), greatly reducing the number of pulse valves.

6. The pulse valve three state dust cleaning mechanism adopts PLC automatic control, and has two optional control modes: timed or manual.

7. Filter cartridges with different numbers of columns and rows can be combined according to the installation space requirements; The unit filtering area occupies a small three-dimensional space, which can save users a lot of space resources and indirectly reduce their one-time investment costs.

8. The powder recycling filter cartridge dust collector has a long service life, with the filter cartridge having a service life of up to 2 years, greatly reducing the number of times the filter cartridge needs to be replaced (traditional bag filters are replaced on average every 6 months). It is easy to maintain and greatly reduces maintenance costs for users during use.