vibrating filter cartridge dust collector

The resistance of the vibrating filter cartridge dust collector increases with the increase of the thickness of the dust layer on the surface of the filter material. When the resistance reaches a certain specified value, carry out dust cleaning. In order to ensure the normal operation of the system, the upper limit of the resistance of the dust collector should be maintained within the range of 1400-1600Pa. When this limit is exceeded, the PLC pulse automatic controller should issue commands through fixed resistance or timing to perform three state dust cleaning. The dust collected in the rear ash hopper is continuously discharged through the ash discharge valve.

After the dusty gas enters the dust hopper of the powder recovery filter, due to the sudden expansion of the airflow section, some coarse dust particles in the airflow settle down under the action of gravity and inertia; After entering the filtering chamber, dust particles with fine particle size and low density deposit on the surface of the filter material through a combination of Brownian diffusion and sieving effects. The purified gas passes through the filter cartridge and enters the clean air chamber of the upper box, where it is collected and discharged from the air outlet.

The four major characteristics of vibrating filter cartridge dust collector:

1. Automatic dust cleaning system. The vibrating filter cartridge dust collector can complete the dust cleaning process in a very short time. And ready for the next operation. This is the entire simple dust cleaning process. The vibrating dust collector has an automatic cleaning and self-cleaning mode. The offline cleaning system is fully automated and does not require any other steps or special procedures. The cleaning process starts running every time the machine is stopped. No faults or malfunctions, as long as the fan is turned off, the cleaning cycle of the vibrating dust collector begins.

2. Easy to repair and install. When the vibrating filter cartridge dust collector unit is opened for maintenance, the clean filter cartridge is displayed in front of it. When it needs to be replaced, the unique structural design can also ensure convenient disassembly and replacement. High dust removal efficiency. The dust removal efficiency is over 90%.

3. Special noise reduction technology. The main soundproof chamber of the vibrating filter cartridge dust collector unit has been treated with special sound-absorbing materials for noise reduction. After taking such measures, combined with the heavy structure of the machine and isolation supports, the quiet and stable operation of the unit was ensured. Once the dust cleaning process is completed, the dust barrier will come into effect to prevent the secondary flying of light and fine dust and the re contamination of the filter element.

4. Double layer filtration technology. This' pre filter 'can withstand large dust loads, endowing the filter element with more perfect self-cleaning performance, which helps the dust collector to perform almost immediately after startup.