Multi tube cyclone dust collector

The XD-II multi tube cyclone dust collector is composed of an intake pipe, an exhaust pipe, a cylindrical body, a conical body, and an ash hopper. The structure of the cyclone dust collector is simple. Easy to manufacture, install, and maintain, with low equipment investment and operating costs. It has been widely used to separate solid and liquid particles from airflow. Or separate solid particles from liquids. Under normal operating conditions. The centrifugal force acting on particles is 5-2500 times that of gravity, so the efficiency of cyclone dust collectors is significantly higher than that of gravity settling chambers. Dongguan Tianming Environmental Protection Company has successfully developed a cyclone dust removal device with a dust removal efficiency of over 90% based on this principle. In mechanical seat removers. Cyclone type seat remover is a type of efficiency quotient. It is suitable for removing non viscous and non fibrous dust, mostly used for removing 5. The above particles have a dust removal efficiency of 80-85% for 3um particles in a parallel multi tube cyclone dust collector device. The cyclone dust collector constructed with special metal or ceramic materials that are resistant to high temperature, wear and corrosion can operate under conditions of temperature up to 1000 ° C and pressure up to 500 × 105Pa. From technical and economic perspectives, the pressure loss control range of the cyclone dust collector is generally 500-2000Pa. Therefore, it belongs to a medium efficiency dust collector and can be used for the purification of high-temperature flue gas. It is widely used as a dust collector in boiler flue gas dust removal, multi-stage dust removal and pre dust removal. Its main disadvantage is that its removal efficiency for small dust particles (<5 um) is relatively low.

Classification of XD-II Multi tube Cyclone Dust Collector:

① The high-efficiency cyclone dust collector has a small cylinder diameter and uses rice to separate finer dust. The dust removal efficiency is over 90%:

② A high flow cyclone dust collector with a large cylinder diameter is used to handle large gas flow rates. Its dust removal efficiency is 50-80%

③ Universal cyclone dust collector, with moderate air handling capacity. Due to different structural shapes, the dust removal efficiency fluctuates between 70-85%,

④ Explosion proof cyclone dust collector with explosion-proof valve and explosion-proof function.