dust collector cylinder

Dust removal cylinders are suitable for standard cylinders of various types and specifications, including ordinary single rod double acting, buffered, oil-free, thin, square, and micro types, as well as non-standard cylinders with modified designs based on standard cylinders. It also applies to the cylinder parts of various air deficient cylinders designed on the basis of ordinary standard cylinders.

The characteristics of the dust removal cylinder are:

1) Only one end is used for air intake (exhaust), with a simple structure and low gas consumption.

2) By resetting with spring force or diaphragm force, a portion of the compressed air energy is used to overcome the spring force or diaphragm tension, thereby reducing the output force of the piston rod.

3) Install springs, diaphragms, etc. inside the cylinder, usually with a short stroke; Compared to double acting cylinders of the same volume, the stroke is smaller.

4) The tension of the cylinder reset spring and diaphragm varies with the size of deformation, so the output force of the piston rod changes during travel.

The normal working conditions of the dust removal cylinder are: medium and ambient temperature of -5~70 ℃, working pressure of 0.1~1Mpa, cylinder movement speed range of 50~500mm/S, solenoid valve K25JD to 25 series two position five way globe directional valve can be divided into five port two position/five port three position series specifications. The appropriate diameter, voltage, connecting pipe thread, and installation form of the solenoid valve should be selected according to the project requirements. It can also be selected according to the actual use.

Standard dust removal cylinders are suitable for various industries. The cylinders used in dust removal equipment are generally equipped with lifting valves and electromagnetic pulse valves. The company customizes cylinders with different cylinder diameters and strokes, cylinder flanges, single ear and double ear matching cylinders, as well as cylinder standard air rods and cylinder extended air rods according to specific customer requirements and needs.

Compressed air enters the air source processing component, undergoes water filtration, pressure reduction, and lubricating oil treatment, and then dry, clean, and lubricated air with pressure enters the cylinder through an electromagnetic valve. The solenoid valve receives signals from the electrical control cabinet, controls the action of the cylinder, and realizes automation processes such as cold air, ash unloading, offline ash cleaning, and return air conversion. Standard cylinders can be divided into 63, 80, 100, and 125 specifications.