building electric suspended basket

As an important equipment for high-altitude operations, the floating basket may experience various malfunctions during use. We need detailed analysis and solutions for these faults to ensure the safety and efficiency of construction. The following is a detailed introduction to some common faults and their solutions in electric hanging baskets.

Common faults of electric suspension basket

Power issue

The power indicator light is not on: check if the power is connected and if the transformer or bulb is damaged.

Motor not turning: It may be due to phase loss, internal phase failure of the motor, or wire rope stuck in the hoist. It is necessary to check the circuit and replace damaged parts.

mechanical failure

The hoist cannot start: it may be due to the power plug not being firmly plugged in, the start button being damaged, the fuse being blown, etc. It needs to be repaired or replaced according to the situation.

The lifting mechanism actuator is not working: it may be due to lack of DC voltage, damaged rectifier tube, damaged fuse, etc. It is necessary to check and replace the damaged parts.

Electrical malfunction

The limit switch does not work: it may be due to the reverse connection of the power phase sequence, damage or poor contact of the limit switch. It is necessary to exchange the phase sequence or replace the limit switch.

Automatic sliding of the motor after power failure: It may be due to oil stains on the steel wire rope, excessive wear on the pulley groove, or malfunction of the motor brake. It is necessary to remove the oil stains, replace the pulley, or adjust the brake.

Other faults

There are no limits to the operation control: it may be a fault in the limit switch, start button, or up contactor, and the limit switch or contactor needs to be replaced.

The angle of the safety lock rope is too large: it may be due to damage to the spring inside the safety lock or too much dirt, which needs to be cleaned or sent back for repair.

resolvent

Solution to power issues

Check if the power switches at all levels are effectively closed, and replace transformers or light bulbs if necessary.

Mechanical fault resolution methods

Inspect the disassembled basket components, such as cleaning, lubricating, and replacing damaged parts.

Solution to electrical faults

Check if there is a short circuit or open circuit in the power supply circuit, and if the motor is damaged.

Other troubleshooting methods

After the repair is completed, perform a functional test on the basket to ensure that it can operate normally.

The troubleshooting of electric suspension baskets is a complex process that requires comprehensive consideration of multiple aspects such as power supply, mechanical, and electrical issues. In practical operation, the operating procedures should be strictly followed to ensure safety. At the same time, appropriate repair methods and materials should be selected according to the specific situation to avoid blind actions leading to greater damage. Only in this way can the normal operation of the electric hoist be effectively guaranteed, thereby ensuring the safety of high-altitude operations.