-
Bag filter
-
Cyclone dust collector
-
Dust collector for building materials industry
-
filter cartridge dust collector
-
boiler dust collector
-
sawdust dust collector
-
Dust collector in mining stone factory
-
kiln dust collector
-
chemical industry dust collector
-
Metallurgical dust collector
-
stainless steel dust collector
-
steelplantdustcollector
-
wet electrostatic precipitator
-
PP spray tower
-
electric tar precipitator
-
Waste gas treatment equipment
-
Dust humidifier
-
Material hoist
-
Belt conveyor
-
除尘器布袋
-
除尘器骨架
-
电磁脉冲阀
-
除尘器气缸
-
滤筒除尘器滤芯
-
通风阀
-
抑尘装置
-
卸料器
-
螺旋输送机
-
工业吸尘、吸水机
-
风机消音器
-
风机
-
控制柜
-
气旋塔
-
石膏板举升机
-
电动吊篮
material mechanical conveying equipment
The material hoist is a fixed mechanical conveying equipment, mainly suitable for continuous vertical lifting of powdery, granular and small materials. It is equipped with safety protection devices such as broken rope protection safety device, stopping safety device, buffering device, upper and lower height and limit limiters, and anti loosening rope device.
main features
Wide range
This type of hoist has fewer requirements for the types and characteristics of materials. It can not only lift general powder and small granular materials, but also materials with high grinding properties, good sealing, and less environmental pollution.
Good reliability
Advanced design principles and processing methods ensure the reliability of the entire machine operation, with a fault free time exceeding 20000 hours. The lifting height is high, and the elevator runs smoothly, so it can achieve a higher lifting height.
Long lifespan
The feeding of the elevator adopts an inflow type, without the need for digging with a bucket, and there is little squeezing and collision between materials. This machine is designed to ensure that materials are less scattered during feeding and unloading, reducing mechanical wear and tear.
The working principle of the material elevator is as follows: the hopper scoops up the material from the storage below, and as the conveyor belt or chain lifts it to the top, it flips down after passing around the top wheel. The material elevator tilts the material into the receiving groove. The transmission belt of the material hoist with belt drive generally adopts rubber belt, which is installed on the lower or upper transmission drum and the upper and lower reversing drum. A material hoist with chain drive is generally equipped with two parallel drive chains, with a pair of drive sprockets on the top or bottom and a pair of reversing sprockets on the bottom or top. Material elevators are generally equipped with a casing to prevent dust from flying in bucket elevators.
+86 13920372366
www.yongjing-machinery.com
info@yongjing-machinery.com
Pengcheng Lane, Liqizhuang Street, Xiqing District, Tianjin City
Copyright © 2024-2025 http://www.yongjing-machinery.com. All Rights Reserved Yongjing (Tianjin) International Trade Co., Ltd Copyright