woodworking specific dust collector

The woodworking specific dust collector system adopts the working principle of combining inertial separation and filtering dust removal. It can handle mixed dust airflow and separate fine particles below 5um. It is an ideal replacement product for traditional cyclone dust collectors. It adopts a modular structure design of galvanized sheet, which is beautiful and generous. The filter bag is made of materials to reduce fire hazards. At the same time, it adopts the technology of spraying and cleaning the filter bag one by one with a large meteor electromagnetic pulse valve, which has low operating resistance for dust removal.

working principle:

The woodworking specific dust collector consists of a modular woodworking dust collector, main pipeline, branch pipeline, dust separation section, and ash unloading device. The dust generated during work enters the settling chamber of the dust collector through the main pipe under negative pressure and settles for the first time. The fine dust that has not settled moves upward with the airflow and passes through the filter bag for secondary filtration. According to the dust concentration and amount, the filter bag is periodically sprayed by a pre-set automatic pulse cleaning device. The fallen dust falls into the settling chamber and is discharged by the ash discharge device.

For the workshop of large wood processing enterprises, a constant pressure settling type network pipe layout is required. The constant pressure vacuum settling conveyor tank is equivalent to a constant pressure vacuum chamber, and the main body is made of galvanized sheet with a standard modular structure. It can be easily extended, shortened or disassembled according to needs, which is convenient for the future renovation of the vacuum suction pipe network and can adapt to the needs of production processes and changes in vacuum suction air volume in the long run.

During system operation, coarse and heavy material blocks, as well as most of the powder, will settle to the bottom of the system and be discharged outside the system by the internal scraper conveyor. A small amount of light and fine dust will enter the dust collector through the main pipeline, which can reduce the workload of the dust collector and extend its service life.

The constant pressure vacuum generated in the conveying trough can ensure that each suction branch pipe connected to it can obtain uniform pressure, thereby increasing the suction speed of each suction port.

Woodworking specific dust collectors are suitable for large wood processing workshops and other environments where there is a high risk of significant changes in dust collection volume or production processes.